I was using Orthos to test the stability of my system but ended up stopping after about 9 minutes, it said there was some error, heres what got posted up.
Type: Blend - stress CPU and RAM Min: 8 Max: 4096 InPlace: No Mem: 1790 Time: 15
CPU: 3200MHz FSB: 400MHz [400MHz x 8.0 est.]
CPU: 3200MHz FSB: 400MHz [400MHz x 8.0 est.]
8/24/2007 2:31 AM
Launching 2 threads...
2:Using CPU #1
1:Using CPU #0
2:Beginning a continuous self-test to check your computer.
1:Beginning a continuous self-test to check your computer.
2ress Stop to end this test.
1ress Stop to end this test.
2:Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
1:Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
1:Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length.
2:Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length.
1:Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length.
2:Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length.
1:Test 4, 4000 Lucas-Lehmer iterations of M19174369 using 1024K FFT length.
2:Test 4, 4000 Lucas-Lehmer iterations of M19174369 using 1024K FFT length.
1:Test 5, 4000 Lucas-Lehmer iterations of M18874369 using 1024K FFT length.
2:Test 5, 4000 Lucas-Lehmer iterations of M18874369 using 1024K FFT length.
1:Test 6, 4000 Lucas-Lehmer iterations of M18874367 using 1024K FFT length.
2:Test 6, 4000 Lucas-Lehmer iterations of M18874367 using 1024K FFT length.
1:FATAL ERROR: Rounding was 0.5, expected less than 0.4
1:Hardware failure detected, consult stress.txt file.
1:Torture Test ran 9 minutes 25 seconds - 1 errors, 0 warnings.
1:Execution halted.
2:Torture Test ran 9 minutes 25 seconds - 0 errors, 0 warnings.
2:Execution halted.
I have a P35 motherboard, an E6750@ 3.2GHz, 2x 1 gig Gskill Ram, a transformer case, a zalman fan, and the way i have my cpu overclocked is with 400 FSB at 1.25 voltage. Whats the issue?
Type: Blend - stress CPU and RAM Min: 8 Max: 4096 InPlace: No Mem: 1790 Time: 15
CPU: 3200MHz FSB: 400MHz [400MHz x 8.0 est.]
CPU: 3200MHz FSB: 400MHz [400MHz x 8.0 est.]
8/24/2007 2:31 AM
Launching 2 threads...
2:Using CPU #1
1:Using CPU #0
2:Beginning a continuous self-test to check your computer.
1:Beginning a continuous self-test to check your computer.
2ress Stop to end this test.
1ress Stop to end this test.
2:Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
1:Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
1:Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length.
2:Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length.
1:Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length.
2:Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length.
1:Test 4, 4000 Lucas-Lehmer iterations of M19174369 using 1024K FFT length.
2:Test 4, 4000 Lucas-Lehmer iterations of M19174369 using 1024K FFT length.
1:Test 5, 4000 Lucas-Lehmer iterations of M18874369 using 1024K FFT length.
2:Test 5, 4000 Lucas-Lehmer iterations of M18874369 using 1024K FFT length.
1:Test 6, 4000 Lucas-Lehmer iterations of M18874367 using 1024K FFT length.
2:Test 6, 4000 Lucas-Lehmer iterations of M18874367 using 1024K FFT length.
1:FATAL ERROR: Rounding was 0.5, expected less than 0.4
1:Hardware failure detected, consult stress.txt file.
1:Torture Test ran 9 minutes 25 seconds - 1 errors, 0 warnings.
1:Execution halted.
2:Torture Test ran 9 minutes 25 seconds - 0 errors, 0 warnings.
2:Execution halted.
I have a P35 motherboard, an E6750@ 3.2GHz, 2x 1 gig Gskill Ram, a transformer case, a zalman fan, and the way i have my cpu overclocked is with 400 FSB at 1.25 voltage. Whats the issue?