I cant seem to get to 3.3GHz.
When I set FSB to 366 and 1.35Volts, I also changed the RAM Frequency to the 900ish and kept the 5-5-5-15 timings.
But when I boot my computer, it loads vista but when I login, i get the blue screen which tells me its a RAM issue.
What frequency do i set my RAM to if I want to run a 366 FSB to my system?
And how do I change the 2:3 ratio so it doesnt follow that ratio or does it change when I set the frequency for the RAM?
at 366FSB with 2:3 ratio, I should be able to set my RAM up to 1098...
(366/2)x3 = 549MHz (1098DDR2)
At 3.0GHz
(333/2)x3 = 499.5MHz (999DDR2) ----> This one is stable but when I go to the one above, its not stable.
Am I doing this wrong or something?
When you change the FSB higher dont you have to decrease the RAM frequency too?
Overclocking is confusing me ahhh.
When I set FSB to 366 and 1.35Volts, I also changed the RAM Frequency to the 900ish and kept the 5-5-5-15 timings.
But when I boot my computer, it loads vista but when I login, i get the blue screen which tells me its a RAM issue.
What frequency do i set my RAM to if I want to run a 366 FSB to my system?
And how do I change the 2:3 ratio so it doesnt follow that ratio or does it change when I set the frequency for the RAM?
at 366FSB with 2:3 ratio, I should be able to set my RAM up to 1098...
(366/2)x3 = 549MHz (1098DDR2)
At 3.0GHz
(333/2)x3 = 499.5MHz (999DDR2) ----> This one is stable but when I go to the one above, its not stable.
Am I doing this wrong or something?
When you change the FSB higher dont you have to decrease the RAM frequency too?
Overclocking is confusing me ahhh.