$opening = "::wavewave::";
$echo = "A few suggestions, you've probably already tried, but I have to state it anyways.
Make sure the switch on the Power Supply is turned on, if still no power to the machine after pushing the power button on the front, use a screw driver or some other metal object to touch the two pin directly on the MotherBoard together after taking off the cord to the power switch. I hope that made sense. That should allow the power to come on.
If not, it's probably a bad power supply, or bad RAM. The RAM might not be seated all the way, if they are, try replacing them with others, and the power supply. Temporarily from a different machine will be suffice. If it still does not come on, your mother board is probably bad. Usually only a bad power supply, or bad mother board will prevent any of the fans coming on. Bad RAM, CPU or anything else will still allow power.
Also, be sure to check the plug it's connected to, if it's connected to a surge protector, then make sure the switch is turned on. Good Luck!";