Boring. I am going for it!!!

Status
Not open for further replies.
or as long as it will run. if it will only post at 375, i bet it really isnt stable at 350. may need more than one notch. but wait until it doesnt pass to raise it more than that, it may do it on one notch like b1gapl said.
you intel guys...isnt 46* a little high for idle stock voltage? O.P. you are at stock voltage, right?
 
Okay so here is what happened. I was at 375mhz. I upped the voltage one notch to 1.3525, ran it at 365mhz it would run but orthos halted.So I dropped it to 350mhz currently running orthos. with the same voltage. If it runs stable at that point. what do I need to do to get it to run at 375 or higher? Mobo temp under full load is at 37C and the cpu is at 39 and the core #1 is 46C and core #2 is at 46c.
 
Those are great temperatures for load. I'd say it's ok, to give it another one notch of juice, to see if it can stress at 375.
 
Status
Not open for further replies.
Back
Top Bottom