b1gapl Mod Emeritus Messages 13,044 Location USA Jun 15, 2007 #21 Hey Ste, Would you say 1.6v is the stopping point? The highest I've had mine was 1.55v...
Ste Do not Stare at my Avatar Messages 9,578 Location Upon Gleaning Infinity Jun 15, 2007 #22 The only thing that limits you is Temps. If temps are below Limit (Includes Northbridge, RAM And CPU temp), then voltages (Except for RAM Voltages) Can be as high as required.
The only thing that limits you is Temps. If temps are below Limit (Includes Northbridge, RAM And CPU temp), then voltages (Except for RAM Voltages) Can be as high as required.
b1gapl Mod Emeritus Messages 13,044 Location USA Jun 15, 2007 #23 At 1.55v, my temps were 50C idle. So I guess load would be 60C.
aspire The Water Cooling Guru Messages 5,308 Location United States Jun 18, 2007 #24 I hit 1.65V (maxed out my mobo..) Idle in bios was 65C and this was water cooled with a 0C ambient I was able to push my e6600 to 3.78 for a Aquamark 3/Super Pi suicide run I run it at 3.6 daily at 1.35V core
I hit 1.65V (maxed out my mobo..) Idle in bios was 65C and this was water cooled with a 0C ambient I was able to push my e6600 to 3.78 for a Aquamark 3/Super Pi suicide run I run it at 3.6 daily at 1.35V core