TheWongizzle
Solid State Member
- Messages
- 8
Hey, i just needed a few tips on how to start overclocking with the Intel D975XBX2.
i dont know what voltage to bump up first. I disabled all the Watchdog and what-not. I also enabled extra power-slope.
my friend told me that it should work fine if i bumped the FSB to 300mhz, but after doing that, games would just freeze up. THe weird thing is, i ran HotCPU for 6 hours and it showed no errors.
i dont understand why its doing this, even after testing it for so long.
I also just re-installed windows and put in two fresh sticks of XMS2 corsair ram.
i dont know what voltage to bump up first. I disabled all the Watchdog and what-not. I also enabled extra power-slope.
my friend told me that it should work fine if i bumped the FSB to 300mhz, but after doing that, games would just freeze up. THe weird thing is, i ran HotCPU for 6 hours and it showed no errors.
i dont understand why its doing this, even after testing it for so long.
I also just re-installed windows and put in two fresh sticks of XMS2 corsair ram.