Graphics Card Temp

Status
Not open for further replies.
up the core and then scan for artifacts using the tool

you can let a bunch of artifacts go by in the scanner as long as it doesnt have a total error and shut down.

My 7900GS has a few pixels artifacting at 615mhz but i cant see any in actual games so i leave it there.
 
Up the core in increments of 10mhz, and scan each time, for a few minutes. If you don't see artifacts...up the core another 10mhz. Do this until you see artifacts, then just lower it, until you don't see artifacts.
 
Up the core in increments of 10mhz, and scan each time, for a few minutes. If you don't see artifacts...up the core another 10mhz. Do this until you see artifacts, then just lower it, until you don't see artifacts.
Ok thanks alot guys i appreciate it. I will let yall know how far got. By the way will i notice a big difference if i overclock it fairly good.
 
Well i messed with it best i got was 620/840 higher than that my computer would freeze up or just restart. I think this is pretty low compared to b1gap's. Maybe i did something wrong?
 
Status
Not open for further replies.
Back
Top Bottom