what do you think of this OC

Status
Not open for further replies.

zenyora

Daemon Poster
Messages
591
well after a full night of work and testing this is what i have:
***cpu(opty170) @ 2.6 from original 2.00 with a voltage of of 1.425(bios) (showing in everest and asus probe as 1.44-1.45)
***temps-idle 35* asus probe...(core1 33* core2*41) in everest.....
***temp-full(i ran 2 instances of prime for 11 hours) ...core 1 i ran a custom test (min 128-max1024 with ram to be tested of 1580 MB)....core2 i ran the small FFt test for max cpu stress....and before i stopped the test i had the fallowing .... http://img413.imageshack.us/img413/3127/55ej2.jpg

****Ram: i used 333 for the index value which is showing my ram at 217 instead of 200 with 2-3-3-5 timings at 1T...
so what do you think .....???
 
that seems like a pretty good overclock and your temps are still pretty low. Optys can go pretty high from what I know so you could add a few more volts like 1.456 or so and see if you cant get 2.8 or something.
 
actually by setting my memroy index value to 233 and taking the memory out of the picture i was able to get my opty to run at 2.7 with a 1.45 voltage ..but when i tried 2.8 i got to the last option which was 1.5v without getting a stable result ...it either hanged or a BSOD..why i have no idea....? so when i decided to just settle for 2.7 i couldn't get the right trimmings .....with these settings i was able to get it stable at 2.6 knowing that it would be at 333 ..even the timmings was adjusted automatically .... i have an ocz platinum ddr 400 pc 3200 2-3-2-5 by the way ..so if you know anything that might help let me know.....
 
Status
Not open for further replies.
Back
Top Bottom