Hey I have recently reformatted my computer in my sig and for some reason my OCing is all messed up... I have the e6400 which stock is 266x8 2.13 but i OCed it without changing voltage to 320x8 2.56 and for some reason since I reformatted it is running with a multiplier of 6 and going 320x6 1.92 and I have no idea what has cuased this or how to fix it or how to change the multiplier.. and it also is saying:
General Information :
Real Frequency : 1600.28 MHz
Multiplier : 6x
Low/High Multiplier : 6x / 8x
Multiplier Locked : Yes
Marketing Frequency : 2128 MHz
Front Side Bus Information :
Bus Speed : 266.7 MHz
FSB Frequency : 1066.9 MHz (QDR)
Initial Frequencies :
Frequency : 2133 MHz
FSB Frequency : 266 MHz
Multiplier : 8x
Control Clock Frequency :
Type : Enhanced SpeedStep (EIST)
EIST Enabled : Yes
C1E - Enhanced Halt Mode : No
Thermal Information :
Thermal Design Power : 65 W
Core Power : 48.77 W (estimated)
Resistance : 0.04 °C/W (estimated)
Thermal control TM1 : Yes
Thermal control TM2 : Yes
Thermal Control Circuit : No
Digital Thermal Sensor : Yes
TM2 Enabled : No
ODCM Enabled : No
Thermal Status : Normal
Processor Performance Information :
Throttle Mode AC : None
Throttle Mode DC : Adaptive
Current Configuration : None
Throttle : 2133 MHz
CPU Shutdown Temperature : 80°C
Processor Power Management Information :
Processor Throttling : Yes
Throttle Range : 75% - 100%
Active Power Scheme : Home/Office Desk
But when i Run PC Wizard 07 and CPU-z it says x6 multiplier... WTF IS GOING ON?? Lol please help me
General Information :
Real Frequency : 1600.28 MHz
Multiplier : 6x
Low/High Multiplier : 6x / 8x
Multiplier Locked : Yes
Marketing Frequency : 2128 MHz
Front Side Bus Information :
Bus Speed : 266.7 MHz
FSB Frequency : 1066.9 MHz (QDR)
Initial Frequencies :
Frequency : 2133 MHz
FSB Frequency : 266 MHz
Multiplier : 8x
Control Clock Frequency :
Type : Enhanced SpeedStep (EIST)
EIST Enabled : Yes
C1E - Enhanced Halt Mode : No
Thermal Information :
Thermal Design Power : 65 W
Core Power : 48.77 W (estimated)
Resistance : 0.04 °C/W (estimated)
Thermal control TM1 : Yes
Thermal control TM2 : Yes
Thermal Control Circuit : No
Digital Thermal Sensor : Yes
TM2 Enabled : No
ODCM Enabled : No
Thermal Status : Normal
Processor Performance Information :
Throttle Mode AC : None
Throttle Mode DC : Adaptive
Current Configuration : None
Throttle : 2133 MHz
CPU Shutdown Temperature : 80°C
Processor Power Management Information :
Processor Throttling : Yes
Throttle Range : 75% - 100%
Active Power Scheme : Home/Office Desk
But when i Run PC Wizard 07 and CPU-z it says x6 multiplier... WTF IS GOING ON?? Lol please help me