saltynay
Patron
- Messages
- 5,149
- Location
- West Coast, Singapore
ok heres the problem and for the life of me i cant figure out whats wrong!!!!
heres my specs:
mobo: p5b deluxe
cpu: e6600
Ram: corsair xms2 2x1gb
optical drives: 2x sony silver ide model no is Aw something lol
Hdd: 1x seagate barracuda 7200.10 320gb
2x seagate barracuda 7200.9 500gb
videocard 8800gts 640mb
case: thermal rock mystic
hsf: Zalman with 120mm fan and copper heat sink thing neva realised it was soo big lol
Built it this afternoon and everything seemed to be going fine except i dont think i plugged everything in correctly as although shows up on start up is its say s detected one of the sonys and the 320gb hardrive sata-non raid. I didnt have an ide capable so i used the one which came with the motherboard which had hdd on it dont see how it really matters it had a master slave and then mobo conector and i had to play around with hdd's to get them to fit in with the 8800gts. At first i got straight into a lil start up screen saying add boot media and press a key well no key seems to be accepted when media is put in both dvd drives i then played around inside for abit and I got one of the drives to pop up as being detected and both of them spin up as if reading something but they then just slow down and nothing happens. The 2x 500gb dont seem to be detected if you have this board i plugged the 320gb hdd into the sata port next to the usb outputs just to the side of the video card slot and the
After i fiddled around inside and got the 320gb working but then i get an error message straight after the detection screen saying chassis intruded. ive tried holding down the click thing which i assume to be the chassis intrusion detector but same message ive tried leaving the chassis top and same error message. I didnt touch that side of the board or any power connectors i did plug the chassis detector in at first but in didnt complain b4 just the comp wouldnt accept a key on screen.
please help me!!!
Matt
heres my specs:
mobo: p5b deluxe
cpu: e6600
Ram: corsair xms2 2x1gb
optical drives: 2x sony silver ide model no is Aw something lol
Hdd: 1x seagate barracuda 7200.10 320gb
2x seagate barracuda 7200.9 500gb
videocard 8800gts 640mb
case: thermal rock mystic
hsf: Zalman with 120mm fan and copper heat sink thing neva realised it was soo big lol
Built it this afternoon and everything seemed to be going fine except i dont think i plugged everything in correctly as although shows up on start up is its say s detected one of the sonys and the 320gb hardrive sata-non raid. I didnt have an ide capable so i used the one which came with the motherboard which had hdd on it dont see how it really matters it had a master slave and then mobo conector and i had to play around with hdd's to get them to fit in with the 8800gts. At first i got straight into a lil start up screen saying add boot media and press a key well no key seems to be accepted when media is put in both dvd drives i then played around inside for abit and I got one of the drives to pop up as being detected and both of them spin up as if reading something but they then just slow down and nothing happens. The 2x 500gb dont seem to be detected if you have this board i plugged the 320gb hdd into the sata port next to the usb outputs just to the side of the video card slot and the
After i fiddled around inside and got the 320gb working but then i get an error message straight after the detection screen saying chassis intruded. ive tried holding down the click thing which i assume to be the chassis intrusion detector but same message ive tried leaving the chassis top and same error message. I didnt touch that side of the board or any power connectors i did plug the chassis detector in at first but in didnt complain b4 just the comp wouldnt accept a key on screen.
please help me!!!
Matt