Fayt19
In Runtime
- Messages
- 382
- Location
- New Mexico
Ok I got my E6600 with a stock cooler to a 3.15
I read up on this guide that this guy did it with a E6400 and the P-DS3
Tell me if i did this right
I went to Advanced BIOS Features and disabled:
Limit CPUID Max to 3
CPU Enhanced Halt (CIE)
CPU Thermal Monitor 2(TM2)
CPU EIST Function
Then I went to MB Intelligent Tweaker (MIT) and did the following:
Set CPU host clock control to enabled
Set CPU host Freq (MHZ) to 350
Set PCI Express Freq (MHZ) to 100
Set System Memory Multiplier to 2.00
Set Dram Timing to manual
Set cas time to 5
Dram Ras# to Cas# Delay to 5
Dram Ras# to precharge to 5
Precharge delay (tRas) to 12
The guide was using a E6400 and set Set CPU host Freq (MHZ) to 376. Well since its a small chip I thought I would try 300 first. Got my CPU to 2.7 looked fine so then I tried to put it to 376 and my BIOS reset...idk what happened so I went back in and checked it to 350 and it looks like it worked fine. I checked my health status in BIOS and my CPU running at 36-38C which is good I think.
Did I overclock this right? Can I improve this at all? I got my Vista CPU rating from a 5.3 to a 5.7 so thats cool =P my base score is still a 5.4 due to my HDD. my Super PI score went from a 21.904 to a 17.4 but what I dont get is ive seen people with my SAME ship get like 14-15 secs ><.
PS Im a newb this is my VERY first overclock so try to explain things like a newbie would understand =P
Edit: I went to run 3DMark06 and when it got to the CPU testing I got blue screened about memory. thought it was a fluke so I ran Prime95 and it did the same thing. I guess this is a sign of unstableness? i think im doing something wrong can someone help me please. right now I have my CPU set to 3.06 (9* 340)
I read up on this guide that this guy did it with a E6400 and the P-DS3
Tell me if i did this right
I went to Advanced BIOS Features and disabled:
Limit CPUID Max to 3
CPU Enhanced Halt (CIE)
CPU Thermal Monitor 2(TM2)
CPU EIST Function
Then I went to MB Intelligent Tweaker (MIT) and did the following:
Set CPU host clock control to enabled
Set CPU host Freq (MHZ) to 350
Set PCI Express Freq (MHZ) to 100
Set System Memory Multiplier to 2.00
Set Dram Timing to manual
Set cas time to 5
Dram Ras# to Cas# Delay to 5
Dram Ras# to precharge to 5
Precharge delay (tRas) to 12
The guide was using a E6400 and set Set CPU host Freq (MHZ) to 376. Well since its a small chip I thought I would try 300 first. Got my CPU to 2.7 looked fine so then I tried to put it to 376 and my BIOS reset...idk what happened so I went back in and checked it to 350 and it looks like it worked fine. I checked my health status in BIOS and my CPU running at 36-38C which is good I think.
Did I overclock this right? Can I improve this at all? I got my Vista CPU rating from a 5.3 to a 5.7 so thats cool =P my base score is still a 5.4 due to my HDD. my Super PI score went from a 21.904 to a 17.4 but what I dont get is ive seen people with my SAME ship get like 14-15 secs ><.
PS Im a newb this is my VERY first overclock so try to explain things like a newbie would understand =P
Edit: I went to run 3DMark06 and when it got to the CPU testing I got blue screened about memory. thought it was a fluke so I ran Prime95 and it did the same thing. I guess this is a sign of unstableness? i think im doing something wrong can someone help me please. right now I have my CPU set to 3.06 (9* 340)