Im running a Asus P5B Mobo/P965 Chipset with a E6400 Chipset @ factory 2.14 GHZ. I slowly up'ed the Speed in AI suite. The multiplier is at 8 and I moved the FSB up to 350, in about 8-9 different increments. I did NOT touch volatage at all, but my CPU is currently running at around 61C, but if I turn my fan on to 100%, it cools it down to 55C. Are these temps too hot? Ive seen E6300's with smaller multipliers reach 3.3 GHZ on stock cooling, and I have a 6400, and I have seem them go higher on stock cooling.
Whats going on?
Note, I did NOT adjust anything besides the FSB in AI Suite. Did not mess with DDR2 Ram settings either. Is there a chance that AI Suite up'ed the voltage on me when I turned the FSB up?
I also have a 25CM/250MM Fan on the side of the case, should I put an ice bag on the outside of it to temporarily bring the temps down?
-Joe
Whats going on?
Note, I did NOT adjust anything besides the FSB in AI Suite. Did not mess with DDR2 Ram settings either. Is there a chance that AI Suite up'ed the voltage on me when I turned the FSB up?
I also have a 25CM/250MM Fan on the side of the case, should I put an ice bag on the outside of it to temporarily bring the temps down?
-Joe
