I have recently purchased a an external enclosure and I assembled it with a 20gb hard drive. It comes with its own power supply. I then used it with my Toshiba laptop and it worked perfectly.
My problem occurred when I tried to connect a 4-port USB hub on one of my laptop 3 USB ports. There is no vacant port on the pc so I have to use one (mouse, gamepad, one extra port I connected with USB hub). When the hub is in placed, I connect my pqi Flash drive, and it work fine. I connect now the external hard drive to the USB hub and that starts the problem. BSOD appears with the following errors:
Goback2k.sys
PAGE_FAULT_IN_NONPAGED_AREA
*** STOP: 0x00000050 (0x83000000, 0x00000000, 0xF852E20F)
(I have a Norton Go Back installed and AVG installed on my laptop.)
When I tried to reboot the pc and turn on the external hdrive, same thing happened. But when I reboot it again, now it won't boot to its OS. Fortunately, I was able to fix the booting system thru a Windows XP installer.
So my problem now are these:
1. Whenever I connect my flashdrive to my PC, an error pop up telling that there was I/O error. But when I connect the Fdrive to other PC, it works fine. I can't figure it out why the problem with my flash drive occurs only to my pc where the problem occurs, and I cannot use it anymore. I tried to format it but same problem again.(Its installer is for win 98 only). What will I do with this drive so I can use it again with my pc?
2. How can I use the external hard drive again? (By the way, few days ago, I lend it with my cousin and he told me that the he can't use it 'coz its already damaged. I suspect a BSOD appeared to his pc and that's the reason why I connect the ext drive to my pc, and the problem happens). Are there steps to follow so I can use it again because I don't want my money to get wasted.
I suspect the USB port hub, the GoBack program is the culprit. But I'm not sure. Please tell me.
Hope you all people out there could help me.
Thank you!
My problem occurred when I tried to connect a 4-port USB hub on one of my laptop 3 USB ports. There is no vacant port on the pc so I have to use one (mouse, gamepad, one extra port I connected with USB hub). When the hub is in placed, I connect my pqi Flash drive, and it work fine. I connect now the external hard drive to the USB hub and that starts the problem. BSOD appears with the following errors:
Goback2k.sys
PAGE_FAULT_IN_NONPAGED_AREA
*** STOP: 0x00000050 (0x83000000, 0x00000000, 0xF852E20F)
(I have a Norton Go Back installed and AVG installed on my laptop.)
When I tried to reboot the pc and turn on the external hdrive, same thing happened. But when I reboot it again, now it won't boot to its OS. Fortunately, I was able to fix the booting system thru a Windows XP installer.
So my problem now are these:
1. Whenever I connect my flashdrive to my PC, an error pop up telling that there was I/O error. But when I connect the Fdrive to other PC, it works fine. I can't figure it out why the problem with my flash drive occurs only to my pc where the problem occurs, and I cannot use it anymore. I tried to format it but same problem again.(Its installer is for win 98 only). What will I do with this drive so I can use it again with my pc?
2. How can I use the external hard drive again? (By the way, few days ago, I lend it with my cousin and he told me that the he can't use it 'coz its already damaged. I suspect a BSOD appeared to his pc and that's the reason why I connect the ext drive to my pc, and the problem happens). Are there steps to follow so I can use it again because I don't want my money to get wasted.
I suspect the USB port hub, the GoBack program is the culprit. But I'm not sure. Please tell me.
Hope you all people out there could help me.
Thank you!