seCuredData
Baseband Member
- Messages
- 30
Hey,
I just tested a system out of case and it was working fine.
After that I put the board back in a case. When I did I was getting no video. I took the board back out connected a speaker to it to get POST beeps, which I did. The beeps are three continous beeps then a long pause, then three continous beeps and a long pause etc. The specs are:
PCChips M825LU V7.2C
AMD Duron 1.4Ghz
256MB PMI DDR-266
350W L&C Power Supply
Onboard VIA KM266 Chipset
Further specs at http://www.pcchipsusa.com/prod-m825luv75c.asp
The system was working out of case with all the same components, nothing was changed. In a non-static enviroment.
If someone could tell me what the three beep codes mean that would be good, thanks.
I just tested a system out of case and it was working fine.
After that I put the board back in a case. When I did I was getting no video. I took the board back out connected a speaker to it to get POST beeps, which I did. The beeps are three continous beeps then a long pause, then three continous beeps and a long pause etc. The specs are:
PCChips M825LU V7.2C
AMD Duron 1.4Ghz
256MB PMI DDR-266
350W L&C Power Supply
Onboard VIA KM266 Chipset
Further specs at http://www.pcchipsusa.com/prod-m825luv75c.asp
The system was working out of case with all the same components, nothing was changed. In a non-static enviroment.
If someone could tell me what the three beep codes mean that would be good, thanks.
